Definition of IT OT convergence
Office IT and shop floor IT were first built separately. IT OT convergence, also written IT/OT, refers in common usage to their coming together: business information systems (IT, information technology) and industrial systems (OT, operational technology) share techniques and exchange data.
For OT, a public definition exists. NIST Special Publication 800-82, “Guide to Operational Technology (OT) Security” (revision 3, September 2023, read on csrc.nist.gov on 12 November 2026), places under it the programmable systems and devices that interact with the physical environment: they detect or cause a direct change by monitoring or controlling equipment, processes and events. The publication’s page mentions a draft revision 4.
According to this text, OT systems, originally isolated, are adopting IT solutions to connect to business systems and allow remote access.
IT and OT: what separates them, according to NIST
| IT | OT | |
|---|---|---|
| Primary concerns | Confidentiality and integrity of data | Human safety, fault tolerance |
| Interruption | Restarting a component is a common response | Shutdowns planned days or weeks in advance |
| Component lifetime | Around three to five years | Around ten to fifteen years, sometimes longer |
The publication adds that a security measure which degrades safety is unacceptable.
Data flowing up, isolation receding
Connecting the two worlds sends installation measurements up to a data platform, where they are combined with business data; complex event processing can look for event patterns there.
NIST gives the counterpart: this integration isolates OT from the outside world far less than earlier systems did. The choice of which flows to open is a matter of IT architecture; keeping operations running during an incident, a matter of cyber resilience.
Network segmentation remains
NIST cites models for organising how the network is divided, including the Purdue model. Its example: in an architecture that follows it, firewall rules prevent a level 4 device from communicating directly with levels 2, 1 or 0. A unidirectional gateway, or diode, lets exchanges through in one direction only.
The publication also mentions the ISA/IEC 62443 standards, on the security of industrial automation and control systems. As for zero trust, it notes that some OT components, controllers included, may not support the techniques it assumes.
The NIS2 directive covers entities in critical sectors, including energy and water.
IT OT convergence, IIoT, Industry 4.0: not to be confused
The Industrial Internet of Things (IIoT) refers, according to the same publication, to networked sensors, instruments, machines and other devices that use an internet connection for the benefit of industrial processes. It is a family of equipment; convergence is the overall movement.
Industry 4.0 is a broader slogan: in common usage, the expression refers to the digitalisation of industrial production as a whole, of which the coming together of IT and OT is one aspect.
A dairy’s temperatures, batch by batch
Suppose a dairy whose quality department wants to match, for each batch, the pasteurisation temperatures with the production orders in the enterprise resource planning software. The controllers and the supervisory system stay on the shop floor network. A historian server, placed in a demilitarised zone, receives the measurements, which leave from there for the data platform. No flow goes back down from business systems to the controllers.
Energy, water and waste operators run these two kinds of IT side by side: the page energy and utilities is devoted to them.